We offer a wide range of products
On these pages, we show a selection of the thousands of products we can offer.
Feel free to contact us, and together, we will find exactly what you need for your construction.
FILTER
GMI D5062S Isolators
I.S. SIL2 Vibration Transducer Interface
The Vibration Transducer Interface D5062S is a high integrity analog input interface suitable for applications requiring SIL 2 level in safety related systems for high risk industries. It provides a fully floating dc supply for energizing vibration transducers, accelerometers or 2-3 wires sensors located in Hazardous Area, and repeats the sensor input voltage in a totally isolated circuit located in Safe Area to drive vibration monitors or analyzers for rotating machinery control and supervision purposes.
FEATURES
- SIL 2 / SC 3
- Input from Zone 0/Div. 1
- Installation in Zone 2/Div. 2
- 0 to –20 V Input/Output Signal
- Wide band signal transfer
- Input and Output short circuit proof
- In-field programmability by DIP Switch
- High Accuracy
- Three port isolation, Input/Output/Supply
Teknisk data
Supply |
|
| Voltage | 24 Vdc nom (18 to 30 Vdc), reverse polarity protected. |
| Current Consumption | 90 mA @ 24 Vdc with 20 mA transducer consumption and 2 mA output load, typical. |
| Power Dissipation | 2.0 W @ 24 Vdc with 20 mA transducer consumption and 2 mA output load, typical. |
Input |
|
| Type | 0 V to -20 V (10 kΩ impedance at terminals 7-8 or 8-9). |
| 3 wires sensor supply voltage | more than -22 V @ 0 mA supply, more than -17 V @ 15 mA supply (current limited @ ≈ 23 mA). |
| 2 wires sensor supply voltage | more than -17 V with constant current supply. |
| 2 wires sensor supply current | selectable @ 4 mA, 6 mA or 10 mA via internal DIP–Switch. |
Output |
|
| Type | 0 to -20 V on 10 kΩ load, with 10 Ω output resistance. |
| Response time | ≤ 10 µs (10 to 90 % step change). |
| Frequency response | DC to 20 kHz within 1 dB maximum. |
Performance |
|
| Ref. Conditions | 24 V supply, 10 kΩ load, 23 ± 1 °C ambient temperature |
| Calibration accuracy | ≤ ± 0.1 % FSR |
| Linearity accuracy | ≤ ± 0.05 % FSR |
| Temp. influence | ≤ ± 0.005 % on zero/span for a 1 °C change. |
Isolation |
|
| Test Voltage | I.S. In/Out 1.5 kV; I.S. In/Supply 1.5 kV; Out/Supply 500 V |
Environmental conditions |
|
| Operating temperature | temperature limits –40 to +70 °C |
| Storage temperature | temperature limits –45 to +80 °C |
Safety description |
|
| Equipment | Associated apparatus and non-sparking electrical equipment |
| Safety parameters | Uo = 27 V, Io = 90 mA, Po = 576 mW at terminals 7-8-9-10. Ui = 30 V, Ci = 0 nF, Li = 0 nH at terminals 7-8-9. Um = 250 Vrms or Vdc, -40 °C ≤ Ta ≤ 70 °C. |
Mounting |
|
| Type | DIN-Rail 35 mm, with or without Power Bus or on custom Term. Board. |
| Weight | about 125 g. |
| Connection | by polarized plug-in disconnect screw terminal blocks to accomodate terminations up to 2.5 mm² (13 AWG). |
| Dimensions | Width 12.5 mm, Depth 123 mm, Height 120 mm. |